DrozmotiX | Adapter Documentation

# Configuration Example

Please make sure that the API is activated! A password can optionally be defined.

api:
  password: 'MyPassword'

The adapter automatically detects devices managed by ESPHome and synchronizes their data with ioBrokerSee ESPHome API refference (opens new window)

Example configuration, for more examples see ESPHome Documentation (opens new window)

esphome:
  name: sensor_badkamer
  platform: ESP32
  board: esp-wrover-kit

wifi:
  use_address: 192.168.10.122
  ssid: "xxxxx"
  password: "xxxxxx"
          
# Enable ESPHome API
api:

# Activate i2c bus  
i2c:
  sda: 21
  scl: 22
  scan: True
  id: bus_a
  
# Example configuration for bh1750
sensor:
  - platform: bh1750
    name: "Hal_Illuminance"
    address: 0x23
    measurement_time: 69
    update_interval: 10s
    
# Example configuration for an GPIO output    
output:
  - platform: gpio
    pin: 12
    inverted: true
    id: gpio_12
    
# Example configuration linking a switch to the previous defined output
switch:
  - platform: output
    name: "Generic Output"
    output: 'gpio_12'

← Examples →